PEAK4 … Adventure Awaits
Win a €100 Voucher for Duotone Apparel this issue in our FREE subscriber prize draw.
Up for an adventure this winter? The fourth generation of Flysurfer’s PEAK is the obvious choice for the most progressive mountaineers and an essential tool in the growing backcountry kite touring movement. The fascination of climbing steep slopes in the lowest wind speeds shifts the boundaries of possibilities and lets you dream of days with endless deep snow descents. In the high mountains our athletes require absolute confidence in their equipment, the PEAK4 relies on safety-optimized technical features and further improves the strengths of the single-skin foilkite concept, as well as its flight feeling. You need to watch this!
The PEAK4 is confidence inspiring and offers a familiar flying feel with continuous power delivery and increased backstall resistance. The result is an ultra-light freeride kite for every beginner which will also meet the needs of daring outdoor athletes.
Experience a new dimension on snow, sand, grass or asphalt. Your next adventure awaits you…
Hybrid Wingtip Technology
Hybrid Wingtip Technology consists of two self-inflating cells on each wingtip of the kite. The openings are protected with mesh material to prevent entry of snow or dirt. The more efficient aerodynamics of the wingtip allows for tighter turning with constant pull, as well as increased backstall resistance. Through that, the bar feedback has been improved considerably, and the flapping of the tip is almost eliminated, giving the PEAK4 a sporty but familiar and confidence inspiring feeling.
B-Safe System
The B-Safe System is guided along the B-Level attachment points, through polypropylene sliding rings. After activating the quick release, the bar slides up the 5th line and the kite is reefed horizontally in the middle. This removes the pressure in the kite and allows it to come down powerless through the wind window. The PEAK4 can then be reactivated immediately and can be restarted in the power zone. Independent launching and landing of the PEAK4 is fully supported by this safety system.
Single Skin Foilkite Concept
The Single-Skin foilkite concept has a very efficient depower and allows for immediate loss of power using the bar throw, offering the PEAK4 high levels of safety on the mountain. Its performance and unparalleled traction generate amazing power per square metre. Increased profile curvature for the PEAK4 maximises lift and agility. The most obvious benefit of the Single Skin concept is the reduced mass of the kite, allowing the PEAK4 to be stable whilst flying at the edge of the wind window in the slightest breeze, without overflying and remaining easy to control in low to high winds.
Optimized Construction
The PEAK4 uses our proven material mix of DLX+ & X-Light cloth, as well as new reinforcements in areas subject to particularly high loads such as the leading edge, the wingtip and the trailing edge of the kite. The single skin concept simply collapses during hard crashes on the leading edge, and therefore can not burst or be badly damaged. The new outline of the PEAK4, the reduced number of cells and bridle layout, in addition to the use of X-Light cloth used for large areas of the canopy, resulting in an incredibly light kite, which has the smallest pack size and is therefore perfectly suited for kite touring.
Focus: Freeride, Touring, Progression
Technology: Single Skin Foil Kite
Skills: Beginner – Expert
Sizes: 3 / 4 / 5 / 8 / 11m
Terrain: Land / Snow
Product page: http://www.flysurfer.com/project/peak4
For more information, please click here.
